- Start your raspberry pi recalbox with a keyboard connected to your raspberry pi.
- Press Enter to access to menu.
- Move cursor keys until you select Network configuration and then press A key.
- Move cursor keys until you select SSID Wifi and then press A key.
- Use the cursor keys to focus over text area, then press A key, write your SSID name, press Enter, move cursor keys until you select OK and then press A key.
- Move cursor keys until you select Wifi password and then press A key.
- Use the cursor keys to focus over text area, then press A key, write your Wifi password, press Enter, move cursor keys until you select OK and then press A key.
- Move cursor keys until you select Activate Wifi and change to ON use the A key.
- Move cursor keys until you select Return and then press A key.
- Wait for a seconds and you'll see a dialog box than shows 'Activated WiFi'. You can close this dialog with A key.
From your PC or Mac, SSH to the ip address of the recalbox. Ssh root@192.168.1.170. Or you can try ssh root@recalbox.local. Login using the id of root and the default root password of “recalboxroot” 3. Type the following commands to set up the GPIO buttons and other parameters for the TFT LCD. Mount -o remount, rw / cd vi recalbox. Adding ROMs in Recalbox. Just like installing themes, go to recalbox share You will see a folder named ROMs and inside it you will see all the supported systems. Just copy your game ROMs to the respective folders. Scraping Artwork and Game Information. On your Recalbox Main Menu go to Scraper.
Your raspberry pi might be connected to wifi.Problems?
If your raspberry still isn't connect, may be in one of these cases:- Remember than SSID name and wifi password are case sensitive.
- If you use strange caracters in SSID name or wifi password then use wire connection and access to share network resource.
Search the file system/recalbox.conf and edit wifi values. - Use channels allowed in France or recalbox doesn't see your wifi network (example: in Spain channel 12 is allowed but not in France, this selection won't work).
The solution is change wifi channel in your router.
Source
- Cómo configurar la red Wifi en Recalbox (vídeo youtube).
ⓘ This article may have been partially or fully translated using automatic tools. We apologize for any errors this may cause.
We have never addressed the subject and yet the retrogaming and the emulator have an important place in the Raspberry Pi community! Today, we present a system that regroups several emulators under the same distribution, Recalbox. Everything you need to rediscover your old games with your Raspberry Pi!
What is Recalbox?
Recalbox is a distribution intended for retrogaming (for those who do not know the phenomenon, it is to use an emulator to play old video games), created from scratch by Mathieu alias DigitalLumberjack, a French developer.
Recalbox is currently stable version 4.0.0
Retrogaming within the reach of all
The advantage of Recalbox is its simplicity of installation and use. In just 5 minutes your Raspberry is ready for many hours of emulation and retro-gaming.
In addition, Recalbox has the advantage of offering many emulators in a single distribution. So, it’s no less than thirty consoles that become accessible, from the simple arcade terminal to the PS1 emulator (PlayStation 1 for the youngest of you)
An emulator compatible with controllers
Always for the sake of simplicity, Recalbox has the great advantage of supporting natively most controllers, allowing you to discover your favorite games as on a real console.
At the level of the controllers, there is for all tastes, from the most modern to the oldest!
We have tried a joystick of arcade terminals, great for playing Pokémon!
In the same way, you can also use your PS4 controller if you have one!
Finally, for those of you who prefer pure retro-gaming with vintage controllers, you can turn to replicas of NES controllers in USB or joystick of arcade terminals
Note that you will be able to play several thanks to the 4 USB ports of the Raspberry Pi 3, the top for an evening retro-gaming with friends!
The equipment needed to make the Pi an emulator
If you want to play in good conditions, you will need the following to install Recalbox on your Raspberry Pi and make it a great emulator!
First, you will need a Raspberry Pi 3 (which you can find here). With its improved performance compared to previous versions, it will ensure you fluid parts.
Then you will need a MicroSD card of at least 16 GB (available at good price here). This point is very important, with us the system could not boot properly on an 8 GB card.
Obviously, you will also need the power supply like this one of the Raspberry Pi!
If you did not have one, you will need a keyboard to install recalbox (this one will do the job).
This is not mandatory, but we advise you to take a controller (we strongly recommend the Xbox 360 controller) like this one on Amazon, the game with the keyboard being all the same much less pleasant.
Moreover, you should consider taking a case, to protect the Raspberry Pi and make the installation a little more aesthetic! Our favorite is this one
As usual, unless you already have one, you will need a screen! We chose to build a small arcade terminal with the official screen of the Raspberry Pi and its cardboard! wich you can find here
With a little DIY and the box of the official touch screen, you can build yourself a real small terminal of arcade!
Installing Recalbox on the Raspberry
At the installation level, Recalbox opts for a simple solution.
Indeed, you will only need to download the OS on the Recalbox Github. On the microSD card side you will need to format it in FAT32 format. Once it is done and the download finished, you only have to decompress the recalboxOS.zip file and transfer its contents to the root of the microSD.
Once this is done, insert the card into the Raspberry Pi, connect it to your screen and then to your power supply!
The installation will then start automatically. You can change the language using the mouse or by pressing the “L” key.
At the end of the installation, you will be redirected to the home screen with a nice background music from Zelda.
Your Raspberry Pi is now a superb emulator of GameBoy Color, Super Nintendo, and many more, all you need for long hours of gaming!
Overclock your Raspberry Pi for a fluid retrogaming
To fully enjoy the capabilities of your Raspberry Pi 2 or 3, you have an interest in overclocking it.
To do this, just go to the settings of the Raspberry Pi. Recalbox offers a dedicated mode named “Pi2”.
Configuration of the controller
If you use Bluetooth controllers, you will need to configure them. To do this, if you are using a Raspberry Pi older than 3, you need to have a Bluetooth dongle.
For a PS3 controller, you will need to use the mini USB cable from the controller to Recalbox. Wait for about 10 seconds while the LEDs are flashing, then disconnect the controller. Press the HOME button, the controller is set.
For the wired controller of XBOX360 (USB), nothing more simple, plug and play!
If you want to change or configure the buttons on your controller, you will need to go to “Configure the controllers”.
The name of the keys is based on a SuperNes controller!
Recalbox Update System on Raspberry Pi
Always in an idea of simplicity and comfort for the user, Recalbox allows you to update the system with a few clicks. To do this, go to “System Options” and then “Update Recalbox”.
After the update is complete, your system will restart automatically!
Add games to emulate
Important point next to which we could not pass, adding new games to your collection!
to increase the list of available games in your collection of retro-gaming, Recalbox gives us the ability to add ROMs (ie game cartridges).
To do this, simply unzip the file from the ROM and copy the file obtained (.bin, .iso, etc. depending on the console to be emulated) into the folder of the console concerned.
In order to update the list of games, a Raspberry Pi restart is required.
Note that in the folder of each console a file gives you the link of a site or find ROMs.
Web interface
Playing Working on this emulator, we discovered a feature beside which we had passed. Indeed, it turns out that Recalbox has a web interface giving access to several options.
We have the ability to monitor the system: processor, RAM and disk monitoring.
We also have hands on bios (for emulator), which allows us to add some to run some games.
In addition, this interface allows to manage the ROMS installed on the Raspberry Pi, these are classified by console.
A log and configuration section is available, as well as a section for emulating a virtual controller.
Conclusion
Recalbox is a magnificent retrogamming distribution that will satisfy a lot of people, whether it is a parent willing to share his childhood memories with his children, a games enthusiast wanting to retrace and discover the history of the video game, a fan of retro games Or simply a group of friends wanting to share a good evening around a game from their childhood!
Recalbox actually puts retro-gaming and emulation at everyone’s fingertips. This is for us the best retro-gaming solution currently available on the Raspberry Pi.
A good idea of family activity at Christmas, bring your Raspberry Pi with Recallbox, a few joysticks and make you a family evening around an old Mario Kart!
Do not hesitate to take a look at our article concerning the choice of accessories of the Raspberry Pi, or that on the installation of a media-center!